Mighty-Mite
Catalog Pages
Mighty-Mite
  • Mighty-Mite: PRE20372
  • Mighty-Mite: PRE20372
  • High-strength and heat-treated steel for increased durability and caster life
  • Dual ball raceways
  • RoHS-compliant plating for corrosion resistance
  • Octagon washer on stem models for easy installation
  • NSF-approved (without thread guards)

A 3D Model of the Mighty-Mite is currently unavailable. Please contact factory for additional details and information. For a quote, please view available part numbers (below) and add to Request a Quote form.

Wheel Diameter
1-5/8″

Tread Width
11/16″

Mounting Height
2-5/16″

Swivel Radius
1-5/8″

Tread Type
Soft Rubber

Caster Finish
Zinc Plated

Capacity/each
70 lbs

Threaded Stem 1/4″-UNC20 x 1/2″ PRE16844TZ-3R
5/6″-UNC18 x 3/4″ PRE16532TZ-3R
3/8″-UNC16 x 1-1/2″ PRE16605TZ-3R
3/8″-UNC16 x 1″ PRE16634TZ-3R
Grip Neck 5/16″ x 1-1/2″ PRE16302TZ-3R
Top Plate 1-3/16″ x 2″, 3/16″ bolt hole PRE16113TZ-3R
Tread Type
Soft Rubber

Caster Finish
Black Oxide

Capacity/each
70 lbs

Threaded Stem 1/4″-UNC20 x 1/2″ PRE16844BO-3R
5/6″-UNC18 x 3/4″ PRE16532BO-3R
3/8″-UNC16 x 1-1/2″ PRE16605BO-3R
3/8″-UNC16 x 1″ PRE16634BO-3R
Grip Neck 5/16″ x 1-1/2″ PRE16302BO-3R
Top Plate 1-3/16″ x 2″, 3/16″ bolt hole PRE16113BO-3R
Tread Type
Polyolefin

Caster Finish
Zinc Plated

Capacity/each
75 lbs

Threaded Stem 1/4″-UNC20 x 1/2″ PRE16844TZ-3E
5/6″-UNC18 x 3/4″ PRE16532TZ-3E
3/8″-UNC16 x 1-1/2″ PRE16605TZ-3E
3/8″-UNC16 x 1″ PRE16634TZ-3E
Grip Neck 5/16″ x 1-1/2″ PRE16302TZ-3E
Top Plate 1-3/16″ x 2″, 3/16″ bolt hole PRE16113TZ-3E
Tread Type
Polyolefin

Caster Finish
Black Oxide

Capacity/each
75 lbs

Threaded Stem 1/4″-UNC20 x 1/2″ PRE16844BO-3E
5/6″-UNC18 x 3/4″ PRE16532BO-3E
3/8″-UNC16 x 1-1/2″ PRE16605BO-3E
3/8″-UNC16 x 1″ PRE16634BO-3E
Grip Neck 5/16″ x 1-1/2″ PRE16302BO-3E
Top Plate 1-3/16″ x 2″, 3/16″ bolt hole PRE16113BO-3E
Tread Type
Polyolefin

Caster Finish
Copper Oxide

Capacity/each
75 lbs

Threaded Stem 1/4″-UNC20 x 1/2″ PRE16844CO-3E
5/6″-UNC18 x 3/4″ PRE16532CO-3E
3/8″-UNC16 x 1-1/2″ PRE16605CO-3E
3/8″-UNC16 x 1″ PRE16634CO-3E
Grip Neck 5/16″ x 1-1/2″ PRE16302CO-3E
Top Plate 1-3/16″ x 2″, 3/16″ bolt hole PRE16113CO-3E

Soft Rubber

Soft rubber wheels combine a soft tread on a hard rubber core, offering quiet movement, a cushioned ride, and added floor protection. These wheels are resistant to most chemical and oils, and have a temperature range of -40° to 160° F.

 

Polyolefin

The most economical hard tread wheel solution, Polyolefin wheels are non-marking and resistant to frequent wash-downs, oil, grease, cleaning solutions, and most chemicals. They have high-impact strength in a lightweight injection molded construction. These wheels have a temperature range of -20° to 180° F.

Finishes

Three Finishes are available: Zinc Plated, Black Oxide, and Copper Oxide (not pictured).

  • Store Fixtures
  • Carts
  • Institutional Equipment
  • Food Service Equipment
  • Furniture
  • Janitorial Equipment
  • Office Equipment

Shepherd Speciality Casters Page 1